The short answer
Microsoft SNDS (Smart Network Data Services) is Microsoft's free portal for owners of sending IP addresses. For each IP it reports a filter result of green, yellow or red, the share of recipients who marked mail as junk, and trap hits. It has no alerting and keeps only a short window, so a bad day is easy to miss.
BlacklistMonitoring connects to SNDS with your own automated data access key, stores the filter result and complaint rate for every IP you monitor, and sends an email or Slack alert when the complaint rate reaches 0.1 percent (warning) or 0.3 percent (critical). The same screen shows whether the IP is on any of 109 DNS blacklists. SNDS signals are included from the Business plan, $149 a month.
What you see for each IP
SNDS data is read once a day, because Microsoft publishes it daily. For minute-level answers on listings we use the DNS blacklists, and the two views together separate a list problem from a reputation problem at Microsoft. Only IPs you already monitor are stored, and the data key is kept encrypted and used only to read your own ranges.
| Signal | What it tells you | How we use it |
|---|---|---|
| Filter result (green, yellow, red) | How Microsoft filters mail from this IP before it reaches the inbox | Stored daily, shown per IP so a change from green to yellow is visible the next morning |
| Complaint rate | Share of Outlook.com recipients who reported mail from the IP as junk | Alert at 0.1 percent (warning) and 0.3 percent (critical), once per day per level |
| Blacklist status | Whether the IP is on Spamhaus, Barracuda, SpamCop and 106 other lists | Checked every 15 minutes on Business, every 5 minutes on Agency and Scale |
| Alert channels | Where the warning arrives | Email, Slack, Teams or webhook, the same channels as your listing alerts |
How to connect SNDS in about five minutes
- 1 Register your sending IP range in the Microsoft SNDS portal. Microsoft verifies that you control the range through the contact address in the IP registry, so the registration has to come from the owner or the provider that holds the block.
- 2 In SNDS open Automated Data Access and generate a key.
- 3 Add the same IP addresses as assets in BlacklistMonitoring.
- 4 Open Reputation signals in your workspace, paste the key and connect. The first data arrives with the next daily read.
- 5 Pick where alerts go. A complaint rate alert is routed like a listing alert, to email, Slack or your webhook.
Why the complaint rate deserves an alert
A listing on a DNS blacklist and a bad standing at Microsoft are different problems with different fixes. An IP can be clean on every list and still land in junk at Outlook.com because recipients keep marking the mail as spam. The reverse also happens, a listed IP can have a low complaint rate because the cause was a compromised account sending to a few hundred addresses.
The practical thresholds are low. A campaign sent to a stale list can move the complaint rate from 0.02 to 0.4 percent in a single send, and the next send to the same list then goes to junk for every Outlook.com recipient. A daily alert at 0.1 percent gives you the chance to pause the campaign, trim the segment and check the unsubscribe link before the damage spreads to the next day's volume.
- Warning at 0.1 percent. Review the last campaign, the list source and how recently the segment engaged.
- Critical at 0.3 percent. Pause sends to Outlook.com and Hotmail addresses from that IP and find the cause before resuming.
- Filter result red. Most of your mail from that IP is being filtered. Check authentication first, then complaint sources, then ask Microsoft sender support to review.
Who uses SNDS monitoring
Email service providers and hosting companies with dedicated IP customers use it to catch one tenant dragging down an IP before support tickets arrive, often together with the IP range blacklist check. Marketing and cold email agencies use it to show clients that Outlook.com reputation is tracked per IP, and to back the weekly report with real data, see white label deliverability reports.
In-house teams sending at least a few thousand messages a day from their own IPs use it as the early warning for Microsoft mailboxes, which a generic email reputation monitoring setup cannot see without the owner's data key. If you want a full picture of what we cover, start with blacklist monitoring.
What SNDS monitoring does not do
SNDS covers Microsoft consumer mailboxes (Outlook.com, Hotmail, Live) and only for IP addresses you own or manage. It does not report on domains, it does not show Gmail reputation, and it gives no data for shared sending platforms where you do not control the IP. For those cases use the domain-level checks in the domain reputation checker. If your IP is listed, the blacklist removal workflow shows the removal path for each list.
Frequently asked questions
What is Microsoft SNDS?
Smart Network Data Services is a Microsoft portal where owners of sending IP addresses see how Outlook.com treats their mail, including a green, yellow or red filter result and the complaint rate. Access is limited to the verified IP owner, which is why a monitor needs your own data key to read it.
How do I get SNDS access for my IP?
Sign in to the SNDS portal with a Microsoft account, request access for your IP range and confirm the authorization sent to the contact address on the range registration. Once approved you can generate an automated data access key and paste it into BlacklistMonitoring.
How often do you read SNDS data?
Once a day, because Microsoft publishes the data daily. Blacklist checks run much faster, every 15 minutes on Business and every 5 minutes on Agency and Scale, so a listing is flagged within minutes while complaint rate changes show the next morning.
At what complaint rate do you alert?
We send a warning when the complaint rate reaches 0.1 percent and a critical alert at 0.3 percent. Both go to the same channels as your blacklist alerts, email, Slack, Teams or webhook, and each level fires once per IP per day.
Which plan includes Microsoft SNDS monitoring?
Business at $149 a month for 100 domains and IPs, and every higher plan. Starter at $49 a month covers blacklist checks and DMARC but not provider signals. Annual billing lowers the monthly price on all plans.
Can I monitor SNDS for a domain instead of an IP?
No. SNDS reports on IP addresses only. For domain-level reputation, use blacklist checks on the domain, DMARC monitoring and an inbox placement test, all of which work without owning the receiving side.
Does a green SNDS result mean my mail reaches the inbox?
It means Microsoft is not filtering mail from that IP heavily. Content, authentication and sender history still decide inbox or junk per message, so pair it with a seed inbox placement test, available on Business and higher.